If you have a lot of guests at home, or you’re engaged in a holiday baking marathon, a clogged dishwasher can really slow down your operation. Washing all your dishes by hand takes more time and water than using your appliance—but yesScheduling a professional out to look at your dishwasher during the holidays can be tough, not to mention expensive. AleFortunately, there are a few things you can do yourself to deal with the clog.
First, check kitchen sink drain
If your sink drain is also not working, it is likely that your kitchen drain is clogged, and the dishwasher is not the source of the problem. try using a snake, also known as a drain auger, to clear the drain from a kitchen sink before you do anything in the dishwasher. If water starts leaking out of the sink and dishwasher after that, it’s likely that the dishwasher doesn’t need any special maintenance. If not, there are some dishwasher-specific steps to try.
First, turn off the power to your dishwasher and garbage disposal., This will help avoid electric shock while you work and prevent you from accidentally turning on anything, If the machine doesn’t have a shutoff, you can turn off the power at your breaker box.
How to Prepare Your Dishwasher to Unclog the Drain
The next step is to empty the dishwasher, remove all the dishes, and Shelves and Racks for Giving you room to work. You will also need to drain the water from the bottom of the dishwasher. For this part, scoop out some of the water with a measuring cup or use a dish towel, large sponge, or bath towel to soak up any residue., ,A wet vac will also work, if you have one.) In addition to making dishwashers more accessible to work, this will make it less likely to slip in water or Fill the area around the dishwasher with water while you’re opening the drain.
g/o media can get commission
13% off
meta quest 2 bundle
enter a new reality
This bundle packs in the Meta Quest VR headset itself, two controllers, Beat Saber and Resident Evil 4 as well, which is sure to make you have a great time.
check drain hose
Once the appliance is ready, the first thing to check is the drain hose. If you have a garbage disposal, this is the hose that connects to the disposal, usually under the sink. If you don’t have a garbage disposal, the hose will connect to the drain at your kitchen sink. The hose can also be attached to the back of your dishwasher. Once you locate the drain hose, you can disconnect it by loosening the hose clamp that holds it to the machine. check to see if there is any debris inside and use a hose clearing equipment to clear out any blockages, run some hot water after turning on the hose to make sure no loose pieces stick inside And the basis for a new clog is formed.
Once you’re finished, replace the hose and be sure to tighten clamp-iIf it comes loose, the dishwasher will backwash onto your floor, causing a flood.
check the drain itself
If there isn’t a blockage in the hose, you may have a problem with the dishwasher’s drain itself. It is accompanied by a screen or strainer at the bottom of the apparatus-like cover. These usually come off with a screwdriver And there may be a filter under the drain cover. Once you have removed the drain cover, use your hose clearing tool to clear the drain. If you think you have cleared the drain, run a small amount of water through it to make sure it is clear. If everything works, you can reattach the drain cover, Put your shelves and baskets back in the dishwasher, and turn the power back on.
WhenAll a professional
if you have a drain Even then Full after taking these steps, you should call a professional. A faulty drain in an appliance such as a dishwasher can cause Flooding, leading to water damage and much more expensive repair bills. To avoid further damage, leave the appliance turned off until you can get it repaired.